If a floor is simply too slick, shiny or dirty, the paint is not going to stick over the long term and won’t be a durable floor. A fast 5 minute going over the floor with a hundred grit sandpaper and cleansing is well worth the time spent for a long-lasting end. Just an thought, however have you ever used chalk paint and clear wax on furnishings? It provides one very durable end, much better than poly.
If it goes on evenly, you need to be good to go. So when you can scrap it off in a day, that isn’t cured. I would wait every week then do the scratch check. Before doing this, apply wood stain conditioner and let it sit for five mintues before applying the stain so it has a chance to soak in. That method your actually staining the wooden and never stainging over a laqured table. The backside isn’t a giant deal nor are areas not more likely to get bumped.
Not wood toned stain, but solid shade black stain. I knew I needed them to be black, but I wasn’t too hip on painting them black. Primer is mainly a base coat of paint that prepares your floor for receiving the ultimate finishing paint. It helps present a clean surface to color your final color on and helps with paint adhesion.
Clean the sanding grit off and clean surface well, let dry. Apply a brand new coat of stain with a rag with circular motions making sure you get everywhere in the desk. Let sit for a couple of minutes then go over again with a clean rag to even out the stain, let dry. Repeat process till you get the desired coverage. Hi Melina – When placing a coat of paint or stain on any floor, it is all the time greatest to sand first. This ensures that the stain or paint has some “tooth” to connect to.
Make certain to lightly sand the realm first, clear off grit. Stir the can well and apply a thin coat let dry and see what happens.